18X7 NON ROTATING FIBER CORE
18x7 NON-ROTATING= (CORE+6(1+6)+12(1+6)) Fiber Core
|
18x7NON-ROTATING TS EN 12385-4 |
||||
|
Diameter of Wire Rope |
FC Unit Weight |
Min. Breaking Load |
||
|
mm |
kg/m |
(180 kgf/mm² ) Fmin kgf Tensile Strenght |
(200 kgf/mm² ) Fmin kgf Tensile Strenght |
(220 kgf/mm² ) Fmin kgf Tensile Strenght |
|
3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 22 24 26 28 30 32 34 36 38 40 |
0.028 0.058 0.095 0.138 0.180 0.245 0.300 0.383 0.450 0.551 0.650 0.750 0.850 0.980 1.240 1.380 1.531 1.853 2.205 2.588 3.000 3.445 3.920 4.425 4.960 5.528 6.125 |
600 900 1380 2082 2790 3700 4680 5783 7000 8328 9880 11335 13070 14800 18737 20900 23132 27990 33300 39093 45339 52050 59218 66852 74950 83507 92529 |
- - - 2305 3083 4098 5170 6400 7735 9222 10915 12550 14440 16400 20750 23000 25615 31000 36886 43300 50200 57634 65575 74028 83000 92470 102460 |
- - - 2540 3400 4517 5713 7057 8530 10162 12040 13832 15925 18067 22866 25370 28230 34157 40650 47700 55330 63515 72266 81582 91462 101900 112915 |
Application Area
- Tower Crane
- High Lifting,
- Cranes,
- Port Cranes
Non-Rotating Wires
- Non-rotatingwiresare more sensitivein termsof transfer,cut and usage. Therefore;
- Both ends should be tied tightly before cutting and should be cut by proper machines.
- Transfer and cut should be done by proper machines followed by regulations.
- Should not be loaded suddenly during use, used small diameter reels and contacted sharp corners.
- Should not be unloaded suddenly during use.
- Should not be rotated by external forces under load by external factors.